Lsk9201 finally appeared on the people''s daily half a month after the Pearl River Daily reported it.

    On June 17, 1992, China''s most authoritative mass daily with the largest coverage and the largest sales volume in the world appeared a detailed report of lsk9201, which was even more detailed than the Pearl River daily. It not only comprehensively reports the current situation of China''s machinery manufacturing industry and the performance of China''s imported CNC machine tools, but also highlights the difficulties faced by the development of China''s machine tool industry. The emergence of lsk9201 will change the pattern of China''s machinery manufacturing industry and even have a great impact on the world machine tool manufacturing industry

    The people''s daily also pointed out that although China''s machine tool manufacturing industry has made great progress after decades of development, it is still far from its foreign counterparts. The development of CNC machine tools in China needs the development of control system and mechanical manufacturing technology at the same time, so as to catch up with the pace of foreign countries.

    For the emergence of dragon CNC in China, the people''s daily commented that Comrade * * * of the general planner of national economic development once said that science and technology is the primary productive force, and practice is the only way to test the standard. The emergence of CNC machine tools is that science and technology is the perfect embodiment of the first productivity. Whether lsk9201 can stand the proof of practice and prove that we can go further in the high-end field of machine tool intelligence still needs the joint efforts of all personnel in the machinery industry in China.

    Huadu CNC gate is a one meter high wall built with bricks and cement yards in the middle. The name of Huadu CNC Equipment Co., Ltd. is engraved on the marble pasted outside. On both sides, it has become a bright and dazzling stainless steel electric control gate, which is the same as most factories in Yunfei later generations. Doing this kind of gate adds another good business to xinkaixing. Although the principle of this thing is very simple, it is still difficult for laymen who don''t understand it.

    At the beginning, Qingfeng machinery was changed into such a gate, which made Wang Qingfeng''s explosive household show off for a long time. This has been done to many upstarts on and off. At that time, Yunfei''s main energy was put on the NC system and NC machining. In addition, the whole Qingfeng machinery was in chaos. He didn''t want to engage in this business at all.

    Yunfei stood at the electronic remote control stainless steel fence door just replaced by Huadu CNC today. While smoking, he repeatedly tested whether there was a problem with the opening and closing control of the door. At this time, seeing Zeng Hongqi and Qin Qingshan coming in from the outside, they hurriedly stopped them and asked them to comment on this gate with little scientific and technological content.

    "Xiao Yun, it''s too wasteful for you to do this. The gate is good. Do you need to repair it again? What you''ve done is too false. It obviously doesn''t conform to the above two words of being realistic. Wu Xin accounts for more than 10000 yuan... "Zeng Hongqi said with pain on his face when he saw the new door.

    Qin Qingshan nodded beside him, echoing Zeng Hongqi''s words. Yunfei not only changed the original gate, but also set up a piece of marble with more than one person high where he just entered the gate, engraved with huge words of pragmatism and innovation. Isn''t this formalism!

    After long CNC reported on the people''s daily, the inquiry sheets from major machine tool manufacturers across the country almost filled Zeng Hongqi''s office in charge of system sales. The heads of several factories are either busy recruiting people or receiving buyers from major machine tool companies or machining factories. Cloud is not the second shareholder, but regardless of anything in the factory, it is now leisurely stirring up the gate of Huadu CNC.

    The original Huadu CNC gate was made of two iron railings. Opening and closing all need manual work, which is very troublesome. Now Yunfei has changed it into an electronically controlled stainless steel automatic door. Qinqingshan is extremely painful. The materials of this set of doors alone cost thousands. If it is not Huadu CNC itself, it is a CNC system. A simple remote control device such as a gate is basically the same as playing.

    "I said Lao Qin, we are engaged in high-end products such as CNC systems. When customers come and see that the doors of our factory are manually controlled, do you think they can believe that we have really made a system higher than the imported system?" Yun Fei despised two earthly buns who had never seen the world.

    When Wang Qingfeng came to Huadu CNC to ask Yunfei about factory management a few days ago, he saw that the gate of Huadu CNC was still an iron railing gate opened and closed by people. He despised Yunfei for at least half an hour.

    Wang Qingfeng''s words reminded Yunfei. Huadu CNC is a high-tech company that makes CNC system. The gate is not only dilapidated, but also has no scientific and technological content. It immediately decided to change the gate to remote control. Qin Qingshan''s busy feet don''t occupy land and don''t bother to take care of Yunfei. As long as he doesn''t tear down the factory, he''ll be happy. Now Qin Qingshan and Zeng Hongqi always regret that when they signed the contract, they were still secretly happy that Yunfei didn''t plug in any management affairs of the handicraft factory. Now everyone of them is busy to death. Yunfei wanders leisurely in the whole factory alone.

    Qin Qingshan and others don''t fully understand Yunfei, the guy who keeps them eating. If anyone complains that Yun is not too busy, Yun Fei immediately put the wrinkled agreement in his trouser pocket on top of the page that he can not interfere in the company''s daily management affairs after he gets the shares.

    On June 28, 1992, Qin Qingshan and others were informed that "important guests" would visit Huadu CNC in July. Qin Qingshan was excited because they guessed that it was likely that senior officials of the Pearl River province and some important leaders of the provincial Party committee came to visit the factory. Since the establishment of Huashu, no leaders have visited the small factory without any fame except the leaders in charge of industry of Huadu municipal Party committee when Huadu was just opened.

    Yun Fei despises several people. How do they know that the people who will come to visit will be the No. 1 figure who once stamped his foot and would make the whole land of China and even the world tremble, and the elderly who will draw a circle in the Pearl River Delta and then change the whole of China.

    Yun Fei is equally excited. How can he not be excited about the old man he admires, who has changed the situation of poverty and backwardness in China for thousands of years, his fellow countrymen of two generations, the old man who only saw it on TV when he was very young, and the old man who left the world with regret? Yun Fei can see it with his own eyes this time. How can he not be excited?

    Once the old man, the second time he went to the place where he drew the circle, once stayed in Huadu for only ten minutes! So when he got the news that the old man was about to visit the south, he became extremely urgent and kept building momentum for the system he copied. He needs the aura of the old man to shine on him. Similarly, he needs the people around the old man to avenge his grandfather in this life.

    On July 1, Wang Qingfeng called Yunfei and told Yunfei that the six Taiwan Youjia processing centers purchased by xinkaixing through camart had been unloaded at Huadu port and would be loaded and transported to xinkaixing tomorrow. Wang Qingfeng hopes Yunfei will go back to check the equipment. After all, no one in the whole Huadu may know more about CNC machine tools than Yunfei.

    Hearing Wang Qingfeng''s words, Yun Fei moved in his heart and hurriedly asked him to come to Huadu.

    "Lao Wang, do you want to be proud, let the whole Chinese know you, and make us xinkaixing more famous?" In Yunfei''s office, Yunfei whispered to Wang Qingfeng.

    "Yes, why not? Do you think I''ll let go if I have the chance to be proud as a upstart? " Wang Qingfeng doesn''t know what Yunfei wants to do, but from the way Yunfei closes the door and closes the window and speaks quietly and seriously, he can feel that there must be good things.

    "Pull the six machining centers to Huadu CNC. Don''t ask me why. I can''t leave these days. You go back and ask Yang Guang to come here with the operator of the machining center with the best technology in the CNC workshop and the three computers..." Yun Fei ordered Wang Qingfeng. We must let the elderly see the power of CNC machine tools.

    "Well... What are you doing? Yang Guang, come here. No one is responsible for the day shift. What''s the matter? Also, if you drop the people from the processing center, what about the production tasks in our factory? " Wang Qingfeng doesn''t know what Yunfei wants to do. Yunfei''s investment this time is a little cruel. After buying millions of equipment, Yunfei doesn''t install and debug the factory at the first time to earn back the cost. Instead, he pulls it to Huadu CNC. What exactly does he want to do?

    "Lao Wang, don''t ask so much about this. After Youjia''s machining center is installed in Huadu CNC, we will pull the most difficult work of our factory here, and we will do it in Huadu CNC. You should also explain the things in the factory. The operator of the processing center only needs one person. What else should you do? " Yun Fei said mysteriously to Wang Qingfeng.

    After all, he is engaged in speculation, but now he doesn''t know whether the old man will really start his southern tour half a year later. If it is revealed, let''s not say whether the old man will visit Huadu CNC again. If he is labeled with a big hat, he won''t pay off.

    Qin Qingshan and others were very happy that Yunfei pulled the six processing machines Xin Kaixing bought from Taiwan to Huadu CNC. Their lsk9201x1 is now debugged by refitting the second-hand milling machine imported a long time ago. The accuracy of ball screw and servo motor is not good, so it is impossible to effectively withdraw the control accuracy and control ability of this system. Now, with the three-axis CNC machining center produced in Taiwan, as long as a control system is removed and a flower number control system is installed, it is enough to carry out the most perfect debugging of this system.

    In the test workshop of Huadu CNC, a large area was drawn and six three-axis machining centers from Taiwan Youjia CNC were placed neatly.

    Yunfei didn''t tell others about his purpose. He said that these machining centers had just arrived, and xinkaixing''s business was not very full. It was just right to test our own CNC system. If xinkaixing had more business, it would also be here for processing. Only through complex processing can we find the problems that are not easy to find in the system.